| Cannot attach a volume to a VMware host over
iSCSI when the datastore uses NFS (DOC-735) |
VMware does not support this configuration. For
more information, see VMware KB
1001856. |
| Launching multiple EBS-backed instances using
-n fails (EUCA-2452) |
When launching EBS-backed instances using the
-n option, instances never go
into running state. Use
euca-start-instance to start
each stopped instance. |
| clusterXX.storage.storageinterface
has no effect (EUCA-4136) |
Setting
clusterXX.storage.storageinterface
will not redirect iSCSI traffic onto a different
interface. To redirect traffic, register the Storage
Controller with a different IP address. |
| "Task is already running" dialog appears when
repairing Eucalyptus Windows Integration Tool
installation on Windows 2008 Datacenter x86_64
(EUCA-4367) |
When you run a repair installation operation on
the Eucalyptus Windows Integration Tool on Windows
2008 Datacenter x86_64 (without Hyper-V), an error
pops up with the message "The specified service
already exists". Select "OK" to continue and the
installation repair will proceed normally. |
| Cannot detach root EBS volume
from stopped instance (EUCA-5033) |
The root EBS volume cannot be
detached from an instance that was launched from
that volume. |
| Large SOAP error messages can fill up logs when
using Hybridfox or the Eucalyptus User Console (EUCA-5333) |
When using Hybridfox or the Eucalyptus 3.2.1 User
Console, large SOAP error messages can quickly fill
the cloud-output log file. |
| Raw data reported by VMware Broker does not
include meaningful volume names (BROKER-22) |
Data reported in the console displays meaningful
volume names. Data exported in raw format labels
each volume or ephemeral storage unit as
scisi0:[N], and must be
translated into meaningful names by another
reporting framework. |
| Reporting values seem to be in error at first
(DOC-707) |
Network traffic numbers in columns
Total and
External might appear to
be incorrect. The external numbers can be greater
than total numbers. This is because the two types of
measurements come from different hosts (external is
from the CC and totals from the NC). These hosts
sample and deliver numbers to the reporting
subsystem at different times. If the report is
requested after the external counter is updated but
before the total counter is updated, the numbers
could appear out of their natural order. In a stable
state without network traffic, the numbers will
become correct eventually, usually within a few
minutes, depending on the polling frequency value
specified in the
reporting.default_poll_interval_mins
and
reporting.default_write_interval_mins
parameters. |
| Race condition can cause secondary Walrus to
appear ENABLED to the secondary CLC in HA setup
(EUCA-4846) |
After repeated state changes of various components
in a HA setup, the secondary Walrus may not be
visible to the primary CLC. Running
euca-modify-service -s DISABLED
WS-[N] will resolve this issue. |
| Default cloud properties must have a value (EUCA-4750) |
If any of the cloud properties are set with no
value, you might experience issues with the output
of the euca-describe-properties
command. |
| Some components are initialized rather than
disabled after an unexpected reboot (EUCA-4354) |
This only occurs when CLC, Walrus, and SC are
located on the same machine in an HA setting. In an
unexpected reboot within that setting, when the
redundant components switch roles, some secondary
components can become initialized rather than
disabled. For a workaround, restart the initialized
components. We strongly recommend that you use one
machine for each Eucalyptus component in HA
mode. |
| User console requires upload of private key to
access a Windows instance password (EUCA-4293) |
Passwords for Windows instances are encrypted for
a specified key pair. The user console requires that
you upload the appropriate private key to access an
instance password. We strongly recommend against
using this feature without HTTPS! To access
the instance password without uploading your private
key, use euca-get-password [instance id] -k
[keyfile] on the command line. |
| User console cannot generate new Windows password
on restarting a stopped instance (EUCA-4291) |
The user console continues to display an old
password after a Windows instance is stopped and
restarted. You must log out of the user console, log
in again, and then generate a password, in order to
log in to a Windows instance that has been stopped
and restarted. |
| User console hangs when launching an instance
with large user data file (EUCA-4223) |
Launching an instance through the console may
hang if the user data file is too big. Launch
instances on the command line if the user data file
is larger than 16KB. |
| A snapshot registered as an image must be
deregistered twice to be fully removed (EUCA-4207) |
Running deregister-image does
not initially delete the image record for a snapshot
that was registered as an image. You must run
deregister-image twice to
ensure the image is deleted. |
| DBResourceCheck exceptions logged at
ERROR log level (EUCA-4177) |
The DBResourceCheck class frequently polls to
determine the number of active database connections
for a given alias. This can result in a
DBResourceCheck exception. This exception is
expected, and is not fatal. |
| The reporting feature in the Eucalyptus
Administrator Console show no metrics. (EUCA-4168) |
This occurs only if you run a report that
includes the current date. The metrics that show no
data are: CpuUsage%,
Net Total In/Out,
Disk R/W, Disk
IOPS R/W, and
DiskTime. For a
workaround, use the CLI command,
eureport-generate-report, to
run reports from the Cloud Controller for a time
period that includes the current date. You can also
use the Eucalyptus Administrator Console and move
the end date up the previous day. |
| The euca-describe-bundle-tasks
command does not keep task status after task
completes (EUCA-4140) |
When bundling a Windows instance, the task is
removed from the task list as soon as the bundle
completes, so euca-describe-bundle-tasks never shows
a 'complete' status. |
| Eucalyptus Console https redirect doesn't work
(EUCA-4104) |
When SSL is enabled for the user console, http
requests do not automatically redirect to the proper
https address, which can result in a blank
page. |
| [error:0290] message printed on upgrade (EUCA-4027) |
The Eucalyptus upgrade process requires a large
number of file descriptors, and an error may occur
if ulimit is not set to an
appropriate value. To avoid this error, set
ulimit -n 5000 before upgrading
Eucalyptus. This error is not an indication of a
failed upgrade. |
| Unable to start stopped instances after upgrade
(EUCA-4026) |
Eucalyptus 3.2 manages ISCSI targets in a
different way to previous versions. The first
attempt to start any stopped instances relying on
iscsiadm will fail, but the
issue is resolved during cleanup so subsequent
requests for that instance will work. |
| ERR-1009 "Mismatched cryptographical keys" gets
written too many times in cc-fault.log (EUCA-3986) |
Currently, CC may log this fault once for each
process in the pool. This is because the logic that
suppresses duplicate faults relies on process-local
memory rather than memory regions shared across CC
processes. |
| Vague error message: Failed to find
corresponding class mapping for element:
RegisterVMwareBroker in namespace.
(EUCA-3808) |
If you get this error message, you need to
install the
eucalyptus-enterprise-vmware-broker-libs
on the CLC. Run yum install
eucalyptus-enterprise-vmware-broker-libs
on each CLC in your cloud. |
| Capacity report shows unordered list of VM types
(EUCA-3707) |
When running a capacity report, the VM types are
not ordered from smallest to largest instance type
when displayed at the cloud or AZ property
level. |
| IP pages do not work properly for admin user in
Eucalyptus User Console (EUCA-3548) |
All user IP addresses are shown, rather than just
the admin user's IP addresses. |
| ENABLED CC have two NAT rules about
169.254.169.254 (EUCA-3440) |
In HA Mode, ENABLED CC can get into a state where
it reports both ENABLED and DISABLED CLC in iptables
for the metadata service. |
| Walrus does not failover in HA if
eucalyptus-cloud process is forcibly killed on
primary (EUCA-3202) |
If the eucalyptus-cloud process is forcibly
terminated (kill -9) on the primary Walrus, failover
to the secondary Walrus is not automatically
triggered. |
| euca-create-image from ebs backed instance fails,
returns 0 (EUCA-1333) |
euca-create-image is currently
unsupported. |
| Snapshots sometimes fail when using VNX (VNX-38) |
This only happens when the Storage Controller sends commands to the storage processor (as specified in the sanhost property) that is not the owner of the volume's LUN. |